Saa 24/7 kliendituge

FxPro Edge'i saab sisse logida https://edge.fxpro.co.uk ja sisestate oma otseprofiili volikirjad.

teil on mitu kontot, saate valida, millist neist järgmisel ekraanil kasutada.

Teil on võimalik lülituda teisele kontole, klõpsates üleval paremas rippmenüüs.

Uue tellimuse esitamiseks on mitmeid viise:

1. Kaardi
   • abil paremklõps diagrammil
   • Klõpsake „Loo uus tellimus”
     
     
   • Ilmub dialoog Uus tellimus. Siin saab reguleerida avatud positsiooni parameetreid.
     
     < br>
     
2. Loo tellimuse nuppude abil
   
   
   
   
3. Teie jälgimisloendi tellimiskampaaniate kaudu (kui kaup on lubatud ühe klõpsuga)
   
   

Avatud positsiooni käsitsi sulgemiseks peate kõigepealt tellimuse vidina otsima. Võite klõpsata nupule „Sulge tellimus” (1-klikiga kauplemine lubatud) või topeltklõps tellimusel ja sulgeda see ilmuvas dialoogis.

Kui olete määranud kehtiva peatuse või kasumi taseme, suletakse teie tellimus pärast seda, kui turuhind jõuab määratud tasemeni.

Kõik suletud positsioonid kuvatakse vidina „Ajalugu“

Ootel olev tellimus on käsk avada positsioon, kui instrument jõuab teie poolt eelnevalt määratud teatud hinnaga. Ootatava tellimuse saate paigutada dialoogi "Tellimus" kaudu, valides vahekaardid "Limit" või "Stop". Dialoogi abil saate määrata ootamatu tellimuse piirhinna ja aegumise kuupäeva / kellaaja.

Pidage meeles, et ostu peatamised ja müügi piirmäärad tuleb paigutada praeguse turuhinna kõrgemale, samas kui müügi peatused ja ostupiirangud tuleb paigutada kehtiva turuhinna alla.

Teise võimalusena saate koheselt paigutada ootamatu tellimuse paremal klõpsamisel diagrammile.

See võib olla tingitud sellest, et olete paigutanud oma stop-loss- või take-profit tasemed praegusele hinnale liiga lähedale. Teise võimalusena võib see tähendada, et olete need tasemed seadnud kehtiva hinna valele poolele.

Pange tähele, et lühikeste positsioonide (müügitellimuste) puhul tuleb peatuskaod määrata kõrgemaks kui praegune turuhind ja Kasumitaseme määrad peavad olema praegusest turuhinnast madalamad.

Iga platvormi minimaalset peatusastet saab vaadata sümboli spetsifikatsioonides: https: // www.fxpro.com/trading/forex

Saate lisada rohkem vidinaid, et kohandada oma tööruumi, klõpsates külgriba nupul „+”. Vidinaid saab ümber paigutada, ümber paigutada ja ümber suuruse muuta.

Saate oma konto toimivust vaadata, klõpsates kas:
a) Ülesriba
b) 'Konto toimivus' ikoon külgribal

1. After you register and log into FxPro Direct, you will see the relevant platform links conveniently displayed on your 'Accounts' page, next to each account number. From there you can directly install desktop platforms, open webtrader, or install mobile apps.
2. Alternatively, from the main website, go to “All Tools” section and open the “Download Centre”.
3. Scroll down to see all the platforms available. Several types of terminals are provided: for the desktop, web version and mobile application.
4. Select your operating system and click “Download”. The platform upload will start automatically.
5. Run the setup program from your computer and follow the prompts by clicking “Next”.
6. After the installation is complete, you can log in with the specific account details that you received on your email after the trading account registration at FxPro Direct. Now your trading with FxPro can begin!

Margin level (%) is displayed on the trading platform and is calculated as follows: Equity / Margin X 100.

FxPro offers Negative Balance Protection (subject to the FxPro Order Execution Policy) to ensure that clients cannot lose more than their overall investment.

The stop out level is 50% for all account types.

For cTrader accounts, Spotware’s 'Smart Stop Out' logic will be used.

Leverage affects the funds required to place a position, multiplying your buying power, allowing you to open a position larger than your deposit. Leverage requires you to post collateral with us in the form of margin and the higher the leverage the less the required margin to open a position of equivalent value or for the same initial margin you can open much larger positions.

Leverage can be expressed either as a Ratio, or in a % format. Both are displayed on our website for easy understanding.

For example, saying you have leverage 1:20 is the same as saying you are required to have a margin that is only 5% of the overall value of the trade.

Excessive use of leverage can of course be very risky because it can magnifies your P&Land this can lead to large losses which can lead to stop out, the automatic closing of your position. This is because your collateral available to sustain potential losses and not fall below the ‘maintenance margin’ required so that your position is not liquidated, is much less as a % of the position when using higher leverage.

Also note that higher leverage increases the effect of spread and Swap fees as a % on your invested capital. For example if the spread on an instrument as a % is 0.1% and you open a trade with 20 times leverage the spread cost as a % on your deposited margin will be 2%.

Example:

With leverage 1:5 you would need to deposit EUR 20,000 to open 1 lot of EURUSD (100,000) , while at leverage 1:30 you could open the same trade with only EUR 3,333.

Please refer to the margin calculator, https://www.fxpro.com/trading-tools/calculators/all-in-one. Here you can test how much of your margin will be needed to open a trade at different leverages and with different lot sizes

VWAP stands for ‘Volume Weighted Average Price’ and applies to market execution orders

If the requested volume is not available all at the same price, the order will automatically execute the maximum volume at the best available price, and then the remaining volume at the next best price and so forth. An average of all these prices is then taken, which is the price the order will execute at (the VWAP).

All stop orders, once triggered, are subject to ‘Market Execution’ which means that FxPro will automatically aggregate all available liquidity at the best possible prices and fill your stop orders at first available VWAP. The VWAP price may be on, above, or below your requested price.

Please see the relevant section of our Order Execution policy: Market Execution Order Market order is the intention to either buy or sell at the current market price, subject to the liquidity available. In the event, there is not enough liquidity at the top of the book to fill a Client’s market order, the system will automatically aggregate the volume received from third party liquidity/ price provider(s) and execute the market order at the ‘Volume-Weighted Average Price’ (‘VWAP’), subject to the liquidity available at the time of the execution.

Example:

The image above shows a snapshot of the Depth of Market for EURUSD.

The right hand side shows ASK prices (price at which you buy)

The left hand side shows BID prices (price at which you sell)

Each tier displays the volume available at each price tier. For example, a trade of 2.50 lots or lower, would receive the top of the book price (the first row of prices). And for trade size above this, the overall price would be calculated according to the price tiers and volumes available at each.

For example, lets say we want to Sell 8 lots (800k units of EUR). The order will be executed as follows:

250,000 * 1.16520 = 291,300

500,000 * 1.16519 = 582,595

50,000 * 1.16518 = 58,259

You then add up all the tiers = 932,154 and divide by your trade size in units

932,154 / 800,000 = 1.16519 (rounded to 5 decimal places)

A ‘Market Order’ applies to the MT4 Market, cTrader, MT5 & FxPro platforms and dictates that you want to enter the market at the current market price, no matter what that may be. Market Orders are filled at VWAP (Volume Weighted Average Price), meaning that you may receive a price above, below or on the price you saw when you executed the order.

Market Execution is also applied to all ‘Stop’ orders across all of our platforms. (Stop losses, Stop outs & pending stop orders).

Because different LPs will have different prices and available liquidity, the available volume is tiered and large orders may be executed at a non-‘top of the book’ price. Top of the book means the best Bid / Ask prices are streamed in the platform. The Market Depth however is much more complex than this and Market Execution accounts for this. Please refer to our ‘What is VWAP?’ question for further information.

A ‘Stop Loss’ order is used to limit losses, or potentially to take a profit after a loss.

It can be attached to an order at the time of opening, or you can modify a position and add a stop loss at a later time. It can also be attached to a Pending Order.

A Stop Loss must be placed below the current market price on Buy positions, and above the current market price on Sell positions.

All Stop orders, which include Stop Losses, are executed with ‘Market Execution’, which means that once the order is triggered, it is filled at the current market price at that time (VWAP).

The VWAP can be on, above or below the requested price.

This means that especially during times of high volatility, you may receive a much different price than your specified stop level, which is referred to as ‘Negative Slippage’.

A ‘Take Profit’ order is used to lock in profits at a specified price, or potentially to limit further losses after a substantial gain.

It can be attached to an order at the time of opening, or you can modify a position and add a take profit at a later time. It can also be attached to a Pending Order.

A Take Profit must be placed above the current market price on Buy positions, and below the current market price on Sell positions.

All ‘Limit’ orders, which includes Take Profit, are executed with ‘Limit Execution’, which means that you will receive your requested price or better. At the time your Take profit is triggered, if a price exists in the market which is in your favour, FxPro will fill you at the better price.

It is not possible therefore, to receive a worse price on a ‘Limit’ order such as Take Profit.

Take profits on long positions will be triggered for execution once the ‘BID’ price reaches your take profit level. Take profits on short positions will be triggered for execution once the ‘ASK’ price reaches your take profit level.

A ‘Stop Out’ is a triggering of a forced automatic closing of a trader's positions in case that person's trading account equity falls below a certain threshold.

Margin level is displayed on the platform as a % anytime you have open positions, and is calculated as: Equity / Initial Margin *100

Equity means the balance + unrealised P&L in each trading account and does not include any balance in your FxPro Wallet.

Example:

The Stop Out level is 50%, depending on your jurisdiction. This means that once your Equity falls to a value equal to 50% of your initial margin, stop out(s) will begin to occur.

So, with an initial deposit of $1000, and an initial margin of $100, you are left with a Free Margin of $900. If losses reach $900, you will have 0 Free Margin remaining, and your margin level % at this time would be 100% (100 equity / 100 Initial margin = 100%). If losses continue and eventually reach $950, the 50% Stop out would be triggered. (50 equity / 100 used margin = 50%)

Now that we have explained how the stop out is applied, let’s see an example at which price you would be stopped out.

You open a Buy position of 100 barrels of Brent Oil (0.1 lot) at a price of $55 per barrel. This position is using a leverage of 10 times (1:10) and you started with $600 in your account.

Initial margin is 1/10= 10% of the exposure. The exposure, in this case, is 100 barrels times 55= $5,500. So, your initial margin is 550, leaving $50 free margin.

The price starts to fall, and we want to find out at what price Equity will be equal to 50% of initial margin. To do this, we need to calculate the price at which our loss will be 50% of 550 = 275, plus the free margin because as we explained in previous example above, losses are first used against free margin. So, the total loss would be 325 or 3.25 per barrel since our position is 100 barrels. When the price drops by 3.25 and reaches (50-3.25) $46.75, that is the BID price, you will be stopped out.

Stop Outs help to prevent trading accounts from falling into a negative balance, however, in very volatile markets, or during market gaps, it is not always possible to fill orders at a specific level and there might be significant slippage when Stop out orders are executed.

As default, price charts are built using the BID price, however, it is the ASK price (the higher price) at which Sell order closures are triggered or buy positions are opened.

You can add the current ask price to the chart on all our platforms if it is not already shown as default.

On MT4 and MT5 go to Charts >Properties and tick the box to ‘Show Ask line’.

On cTrader, right click in the chart and go to ‘Viewing Options’ and tick the ‘Ask Price line’ option.

On the FxPro App, the Ask price appears as default

Slippage refers to instances where the executed price differs from your requested price. I.e. the price ‘slipped’.

Slippage occurs when your Market Order is triggered and filled at a price different to that which you have requested. The difference may only be minimal, or it could be significant. Price Gaps and increased volatility can result in substantial slippage in some cases.

This is a normal market practice and a regular feature of the foreign exchange markets under conditions such as illiquidity and volatility due to news announcements, economic events and market openings. The slippage can be positive or negative. Slippage can also occur when larger orders are partly executed at tier 2 or even Tier 3 prices (see question What is VWAP).

Although we are not required to do so, we publish our Execution Statistics every year on our website: https://www.fxpro.com/pricing/model

Example:

You have a long (buy) position of 1000 barrels (1lot) of WTI prior to market closing at price $50.00, and you set a take profit at price $50.50 and a stop loss order at $49.5.

However, due to significant news reports over the weekend, at the market opening on Monday, WTI opens with an upward gap at price $51.

Therefore, your take profit order will be triggered once the market reopens (as the price has moved above your take profit level), at the price of $51.00, and will be executed at this price or better.

This is how market gaps and slippage may cause more profit or loss than anticipated and why stop orders such as ‘stop losses’ are never guaranteed to be executed at your requested price.

The difference between the Bid and Ask prices is the ‘Spread’, which is what you pay to the broker in return for placing the order through them.

Therefore, you will notice that trades start in a minus figure, as you need to cover the spread before you begin make profit.

Let’s demonstrate this using an example. You buy 1 lot of EURUSD at $1.0700 the bid and ask prices were $1.0698 and $1.0700. When you buy, you get the Ask price. The price moves in your favour by 5 pips making the new Bid and Ask prices $1.0703 and $1.0705. You close the trade by selling at the new Bid price of $1.0703, making 3 pips profit which equals $30.

The reason that in this example your profit is less by $20, is due to the fact that you have been charged a 2pips spread.

Let’s take another example using GOLD, which is denominated in USD. You decide to Sell (short) 100oz (1 lot) when the bid and ask prices were 1600.50 and 1601.00. As this is a sell position, it is opened at the Bid price of 1600.50. The price then moves down in your favour by 0.50, making the new bid and ask prices 1600.00 and 1600.50. You close the trade by buying at the new Ask price of 1600.50.

In this case, even though the price moved in your direction, you were charged the spread and your order was opened and closed at the exact same price (1600.50), meaning that your Profit or Loss is equal to 0.

Spreads are typically floating and fluctuate depending on liquidity and volatility. Volatility is affected by Liquidity and vice-versa.

If you would like to check any orders, please send an email to [email protected] from your registered email address with your account number and the order number of the trade, and we will check your enquiry and get back to you as soon as possible.

You can find the order number in your trade account tab or history tab.

Bear in mind that Buy positions are opened at the Ask price (and closed at the Bid price), whereas Sell positions are opened at the Bid price (and closed at the Ask price).

Therefore, stop losses, take profits and pending orders need to be triggered by the Bid or Ask price displayed on the price chart before being executed.

The Ask price is always higher than the Bid price as it includes the FxPro spread. Therefore, you need to take into account the spread at the time the order was triggered.

For example, if you opened a sell trade on EURUSD at 1.15700 and placed a stop loss of 1.15750, it means your stop loss will be triggered when the Ask price reaches 1.15750. So, if the spread at the time is 1.5ips, you may see your order closed when the price in the chart is only at 1.12735.

The price charts display BID prices by default. If you cannot see the current ASK price in your platform, please refer to our FAQ: How can I show the ASK price on the platform?

Liquidity, in simple terms is the ability to trade (buy and sell) an instrument and is considered good when there are many market participants interested in Buying and Selling the instrument at any volume. The easier it is to sell or buy the instrument at any given volume, the better the liquidity.

The more liquid an instrument, the tighter the spread usually, as the market participants compete to get the best prices. When there is low liquidity, the pricing is generally more erratic, and the spreads may be higher due to lower demand for the instrument.

Since every currency trade involves borrowing one currency to buy another, interest rollover charges are part of forex trading.

Interest is paid on the currency that is borrowed, and earned on the one that is bought. Swap may be positive or negative and applies whenever you leave a trade open overnight.

If you are buying a currency with a higher interest rate than the one you are borrowing, then the net interest rate differential will be positive and you will earn funds as a result. Conversely, if the interest rate differential is negative then you will be charged.

Swap also applies to non-FX instruments, due to the fact that all instruments are traded in particular currency which incurs an interest rate.

On the platforms, ’swap’ is automatically converted into the balance currency. The Operation is conducted at midnight server time (10pm UK time) and will only be charged/gained if you have an open trade at this time.

the swap is calculated and charged once every weekday, however, to account for weekends, a triple charge will take place on Wednesday for FX & metals, and on Friday for other instruments. FxPro Swap rates are in line with the Banks and are reviewed and updated on a weekly basis by the Execution department.

The up-to-date swap lists can be viewed at any time on our website in the instrument specifications or via the trading terminals.

FxPro pakub ka Stop Out -i, mis põhjustab suletud tehinguid kui teatud marginaali tase% on saavutatud. Stop Out tase sõltub konto tüübist ja jurisdiktsioonist, mille alla te olete registreeritud.

Lisaks on FxPro UK Limited finantsteenuste hüvitiste skeemi (FSCS) liige ja FxPro Financial Services Limited on investeerimisfondide (ICF) liige.

For international bank wire deposits, please allow **3-5 business days** for funds to reflect in your FxPro Wallet. FxPro and our receiving bank do not charge any fees for bank wire deposits; however, other banks involved in the process, such as sending or intermediary banks, may apply their own fees.

FxPro Financial Services Limited, FxPro UK Limited ja FxPro Global Markets Limited kliendid võivad oma kontosid rahastada Credit/Debit-kaartidega, sealhulgas Visa, Visa Electron, Visa Delta, MasterCard, Maestro International ja Maestro UK.

1. Sign in to FxPro Direct with your email and password.
2. Open the “Wallet” section and click the “Deposit” button.
3. Now you can choose from a selection of convenient payment methods. All the deposits and withdrawals are processed with no commissions from the FxPro side.
4. Choose the method and specify the amount you want to deposit. Then fill out payment details and follow the prompts on screen to confirm the payment.
5. Once approved, the deposited amount will appear in your FxPro Wallet balance, or the trading account specified, and will be displayed in your Transaction History.
6. You can now transfer funds to an account and begin trading!